
Those chocolates never seem to stop - do any fry survive? I have 6 little Guianacaras in the big tank that have somehow made it, they are easily small enough to fit in the mouths of the Geophagus and severum, but it seems that those fish are not too predatory. I think most of the fry probably get eaten by the silver tetras.After water changes i spent about 2 hours setting up a canister filter on the 100 with a host of issues. The filter was a netlea nv2 (both the netlea and ultramax bt are now using dc motors for more efficient operations) - and ran into a host of issues. First the bioballs which i never used created a lot of dust since they didn't bag them and this got into the gasket along the lid so it leaked and i had to fix that. Then the hose was a bit on the short side so i had to only run it mid tank (i like to place the in/out on opposite and and the aquarium is 48 inches long). Then i need to swap the in and out because while i can read just fine i sometime forget that out means out and not in. Also i purchased an eheim spray bar but it was too thick to fit between the wall and the rim so i have to re-work how i'll get it into the aquairum. Anyway the first 2 weeks i'm just priming it as i keep the original filtration in (matten filter) so in two weeks i'll fix the in/out/spray bar issue when i remove the matten filter. THe problem i have with the matten filter is clogging - not the sponge which seem perpetual but the uplift tubes keep clogging - sometime twice a week i have to clean the little holes out and sometime once every 2 weeks. But there are 4 aquariums with this issue for a total of 9 uplift tubs and if it takes 5 to 10 minutes to clean those holes on each one as often as twice a week - well it gets bloody annoying and if i don't the filtration stops. Now i have a new design to resolve that issue and that is to replace the uplift tubes with a small dc motor that sits behind the sponge and runs a tube to the opposite side under the gravel and up in the corner to a spray bar but i think i'll wait till i move to put that in since it will require tearing up the aquarium to add the tubing under the substrate.
After fixing the canister filter i turned around since the 600 is next to that aquarium and saw this new mess - so now i need a broom to clean it up:
View attachment 931733



To my knowledge not yet but the parents are getting more aggressive at keeping all manners of pests away. Given their size i don't even bother to try to raise a few. They aren't popular enough to give away and they are too large to keep more then a few months. At least with the royal whips i can just stuff them in a container for several months and then move them to an aquarium if i want to keep a few:Those chocolates never seem to stop - do any fry survive?

Yes I know what you mean, although I’m surprised the chocolates are not popular- although I suppose the majority of those who buy fish don’t have big enough tanks for them. I’m certainly not trying to raise any more Guinacaras now. I still have the original 7, one more in the angelfish tank and the 6 babies that I suppose I should really catch while they are still small enough to go in bottle traps, otherwise there’s no way I could catch them…but for the moment I quite like watching them.To my knowledge not yet but the parents are getting more aggressive at keeping all manners of pests away. Given their size i don't even bother to try to raise a few. They aren't popular enough to give away and they are too large to keep more then a few months. At least with the royal whips i can just stuff them in a container for several months and then move them to an aquarium if i want to keep a few:
(around day 28 from hatching)
View attachment 931736
Nothing special - i noticed a large amount of eggs on the glass side during a water change; stole a few 10? 15? eggs - after the water change the male returned to guarding them and fanning them. I know the others in the tank hatched and i saw a few the first day after they hatched but havent' seen them since - but that doesn't mean much - approx 40 gallon of the 90 or so gallon are invisible so there could be none or a lot left. As long as they stay high on the val leaves there isn't much that will predate on them it is just a question of finding enough food. If they spend a lot of time near the bottom things are more iffy.How did you go about breeding the whiptails?




The fry are quite big already…
Yea she was baby sitting them in a cave for about 2 weeks before introducing them to myself. I can't tell you exactly when they hatched because she kept them in there but i knew they had spawned again from her behavior. She is really quite interesting in her behavior and when she wants to get more food for the frys she will bring them to the front for me to feed - wait till i've fed them and then take them to the back again.The fry are quite big already…
That’s really interesting and compared to the Guianacaras, which are much bigger fish and also hide their eggs and wrigglers in a deep cave, but when they bring the fry out they are still incredibly tiny. Yours are huge and very well developed in comparison.Yea she was baby sitting them in a cave for about 2 weeks before introducing them to myself. I can't tell you exactly when they hatched because she kept them in there but i knew they had spawned again from her behavior. She is really quite interesting in her behavior and when she wants to get more food for the frys she will bring them to the front for me to feed - wait till i've fed them and then take them to the back again.
There are wet/dry vacs - at least in usa they are quite cheap though they are more expenisve now - about 1/2 to 1/4 the price of a fluval 407 but yes the 407 is one of those pests that require gravity for flow. There are pumps you can buy that don't require gravity that are not too expensive - $20 or so that might do what you want and there are dry pumps they are loud and more expensive but at least the one i found bloody messy but great for use on your sister.Today I wasted 2 hours trying to make my old Fluval 407 canister work because I wanted to use it as a vacuum cleaner to clean my sump.
I tried to make it work on my kitchen counter and fixed one thing after another before realizing gravity was working against me and it would ever work in my sump either as the filter would be almost even with the floor.
Oh well. Sump cleaning will happen another day. Now I’m wondering if I use my python, a return pump that spills into a bucket, install my Tunze internal filter in there, stir the water and let it work, or use another pump with a cartridge that I can hang.
Canister was such a good option as it would have returned all the clean water to the sump. My water is very clean and I don’t need a WC.
I do have a wet/dry vac but it is so strong it overflows in less than a minute and makes a mess on the floor (5 gallons bucket).There are wet/dry vacs - at least in usa they are quite cheap though they are more expenisve now - about 1/2 to 1/4 the price of a fluval 407 but yes the 407 is one of those pests that require gravity for flow. There are pumps you can buy that don't require gravity that are not too expensive - $20 or so that might do what you want and there are dry pumps they are loud and more expensive but at least the one i found bloody messy but great for use on your sister.
Ok, I have 2 or 3 of those.Which pump - a typical wet pump that take a hose:
https://www.amazon.com/dp/B0DG2BFS32
There are 100's perhaps 1000's.
A dry pump (this one works but i don't really recommend it as i think there are better: It has in/out hose and it doesn't get wet but it is LOUD.
https://www.amazon.com/dp/B01LZ8RP40
I’m not sure if I’m understanding exactly what you need, but I have used small inexpensive pumps to drain a low down tank or bucket, like these, that come in various sizes and flow rates Jad Bomba Sumergible SP-1000 - Acuario Mitad del MundoOk, I have 2 or 3 of those.
Then put one in the sump and run the hose to a pail or drainOk, I have 2 or 3 of those.
No, it’s just that I was trying to filter the water without having to take it out. Filtering in a closed circuit. I’ve decided to use my python and refill. That’s probably the easiest way to get to the crammed areas.Then put one in the sump and run the hose to a pail or drain
Or is there an issue doing that ? The dry pump has the advantage that you can just move the hose around the sump for the in and the out to pail/drian though use long hose on the out side so it doesn't get yanked out. The other route with a submersed pump is more annoying since you have to move the pump around and it can clog.
I could never use a python in a sump because of lack of height but i guess your sump is elevated.No, it’s just that I was trying to filter the water without having to take it out. Filtering in a closed circuit. I’ve decided to use my python and refill. That’s probably the easiest way to get to the crammed areas.

tTat’s the trouble with plecos, you hardly ever see them, my blue phantom bring an exception…on the other hand it’s a bit of excitement when they do turn up after months hidden away!Did usual thursday water change on discus aquarium and spotted one of my three L183:
While they are lovely fishes this is about the most i ever see of them..... I have 1 male and 2 females.
View attachment 932008
Yea - actually i usually see most of my L208 (and they are nice looking pleco); as well as the L397. The blue phantom are iffy - there is a huge one in the 500 that i will sometime see and one with the cupido that i sometime see but that one usually hides if i look at it. The ones in the 600 i almost never see which is a pity since they are the ones that are 'dark' blue and stayed small (around 3 inch). The ones in the 500 and 180 are almost green and both are very large at least 7 inches (i think - they stay near the back so there might be a magnification factor through the thick glass).tTat’s the trouble with plecos, you hardly ever see them, my blue phantom bring an exception…on the other hand it’s a bit of excitement when they do turn up after months hidden away!



















