SunSun Cannister - UV or no UV, that is the question!

C

CatfishJack

Well Known
Member
Messages
1,931
I don't mind paying the extra for the UV if it works well. Or would I be better off buying the cheaper one with no UV and then adding an intank UV?

Edit: or a separate in-line UV
 

Advertisement
To be honest, I noticed absolutely no difference between my fish when I had a UV sterilizer vs. when I didn't. If there is a parasitic infection, then yeah, invest in one ... normal tank? I'd vote none at all. It does kill bad stuff but way too much good stuff to be fully beneficial.
 

Advertisement
Honestly I bought the green machine last night 24watt and just ran it for over 12 hours and I noticed that algae already is not continuing to grow... I WAS going to order the SunSun 304B BUT saying its 55 watt with 525gph sounds good but no actual information on flow rate of actual gph when media and accessories are in...

I found a API Rena XP4 450gph for 185 with media over the SunSun 304B for 104.99 to 129.99 pending on media included...

The XP4 actually tells you there honest flow rate with media & accessories being 190gph BUT it also runs 31watts in which electrical cost will save significantly within just the first year alone.

P.S. Petco sells the green machine for 55.99 24 watt
 
Honestly I bought the green machine last night 24watt and just ran it for over 12 hours and I noticed that algae already is not continuing to grow... I WAS going to order the SunSun 304B BUT saying its 55 watt with 525gph sounds good but no actual information on flow rate of actual gph when media and accessories are in...

I found a API Rena XP4 450gph for 185 with media over the SunSun 304B for 104.99 to 129.99 pending on media included...

The XP4 actually tells you there honest flow rate with media & accessories being 190gph BUT it also runs 31watts in which electrical cost will save significantly within just the first year alone.
Click to expand...

I forget where I found it/saw it, but someone hooked an electric meter to their SunSun 304B. I think their readings were 34 watts with the UV light off and maybe 48 (I think, can't quite remember) with it on. It didn't turn out being the 55 they specify.
Never saw anything about the actual loaded flow rate though. I just ordered one for $119 shipped on Amazon. Every review I've read about it was very good. Don't think I saw any negatives for it.
 
If you want an occasional serious and effective UV sterilization the 24 watt Green Killing Machine is the way to go. Anything else is way too slow. The downside is the expensive bulb replacement.
 
  • Thread Starter
  • #6
I ended up ordering a SunSun 302 no UV. Will get a green machine later if I need one.
 

Advertisement
Is it for your 29g? 302 would probably be perfect for that. I just got the 304B for my 60g, didn't know if the 302 would be enough gph. I probably won't end up using the UV, but it just comes with the extra gph.
 
I forget where I found it/saw it, but someone hooked an electric meter to their SunSun 304B. I think their readings were 34 watts with the UV light off and maybe 48 (I think, can't quite remember) with it on. It didn't turn out being the 55 they specify.
Never saw anything about the actual loaded flow rate though. I just ordered one for $119 shipped on Amazon. Every review I've read about it was very good. Don't think I saw any negatives for it.
Click to expand...

They are 60 bucks on Ebay!
 
They are 60 bucks on Ebay!
Click to expand...

The 304B?! Well I'll be go to.... haha I had discover card cashback that I can use at Amazon, so it ended up making it about $68.
That's almost half off though! Is it from a reputable company?

You don't mean the SunSun HW-302 do you? It is $59.99 on Amazon. I wouldn't think anyone would be able to sell a $120 filter for half price on ebay unless it was used or stolen. lol I guess it's possible though!
 
If you want an occasional serious and effective UV sterilization the 24 watt Green Killing Machine is the way to go. Anything else is way too slow. The downside is the expensive bulb replacement.
Click to expand...

I haven't looked at the bulb replacement, I should have though... how much is it?

They are 60 bucks on Ebay!
Click to expand...


I couldn't find the 304b on eBay for 60 bucks...
 

Advertisement



  • Thread Starter
  • #12
Is it for your 29g? 302 would probably be perfect for that. I just got the 304B for my 60g, didn't know if the 302 would be enough gph. I probably won't end up using the UV, but it just comes with the extra gph.
Click to expand...
Yup! It'll run alongside my Fluval C3 HoB

They are 60 bucks on Ebay!
Click to expand...
I couldn't find anything anywhere close to that on Ebay when I was doing my shopping. Lucky you!

$33 at PetSmart.
Click to expand...
Get your GKM replacement bulbs here:
 
  • Thread Starter
  • #16
The idea is to buy all the other junk you need for cheaper than at petsmart at the same time!

That's always been the whole idea with internet shopping hasn't it?

ImageUploadedByTapatalk 21362178675.099971.jpg
 
Crud it's not a sunsun, is this the same thing?

It same the same pictures of items I think.
 
  • Thread Starter
  • #19
It sure looks like the same thing.

I'm sure it is the same thing. Much like Asus brand computer products can be found with names such as HP and Gateway on them.
 
Lol I seriously think it is, I'm going to get it with all the media for 69 bucks!
 
It's the same manufacturer. Both Sunsun and Grech are re-branded products. I have the Grech GW-304B which is the same as Sunsun HW-304B. Great filter! Got mine for $90 without the media but with complete floss.
 

Advertisement



  • Thread Starter
  • #25
Ha.


You changed your name to "CatfishJack"?
Click to expand...

Yup !!

Well surprise surprise. Mine came with a bag of carbon, a bag of ceramic noodles and 20 bioballs. Just finished getting it installed and running. Aside from my riccia getting caught in the spray bar and exploding, it all worked out nicely.

I put the three foam pads in the bottom tray, noodles in the middle, bioballs on top and then the shallow cap tray on top got a self cut bit of floss.

I'm liking it!
 
Mine only came with 3 bio stars, 30 PPI and micro filter and a 20 PPI and bag of bio zorb...

LoL what do you do with 3 bio stars lol especially when it needs about 55...
 
Haha here's another one! Check this out it's like the new and improved model! Which one should I get I want to order tonight



Edit: Only 20 Watts! Does that make sense?
 
  • Thread Starter
  • #29
Got a link for which one you purchased or which seller?
Click to expand...

This one for $59 shipped

Haha here's another one! Check this out it's like the new and improved model! Which one should I get I want to order tonight
Click to expand...

Looks pretty similar in set up to the sunsun not sure if same manufacturer though
 
Haha here's another one! Check this out it's like the new and improved model! Which one should I get I want to order tonight
Click to expand...

welp you could always order the Jebao... for 60 bucks its kinda worth the experiment to find out.
 

Advertisement



Nice... after I get set up with everything I might get that as well... BUT you should order it first and tell me how it is

lol only turn off is the green tubing... I am already looking for replacement tubing on this blue/grey tubing on the Filstar
 
I willllll, once I give the boyfriend the money cause he's the one with the paypal account.

I already have green tubing on the eheim on the 29. I just hide it behind plants
 
Is this sunsun? I can't find the brand name. I want to compare the wattage on all of these.

10 bucks more, same model, but comes with media.
Click to expand...

That's the one I'm looking at. I found some good reviews but the only con is that they are apparently greased inside. Takes a bit of work to remove it all.
 
Ok so the sunsun is 35 Watts and the jebao is 20? You think that's a misprint? The jebao is 60gph more also.
 

Advertisement



The grease is fish safe and keeps the o-rings from hardening. Silicone grease is totally inert and will not pollute the water. I always keep silicone grease handy to take care of my pumps and filters. Just make sure it's pure and without other harmful chemicals. I've used CRC Technician Grade Di-Electric grease for a long time (only the red one, green/blue is not fish safe).
 
The grease is fish safe and keeps the o-rings from hardening. Silicone grease is totally inert and will not pollute the water. I always keep silicone grease handy to take care of my pumps and filters. Just make sure it's pure and without other harmful chemicals. I've used CRC Technician Grade Di-Electric grease for a long time (only the red one, green/blue is not fish safe).
Click to expand...

Ok good.

Just bought it jebao 69 bucks with media and free shipping.

Just can't best the 20 watt efficiency.
 
True... with all canisters basically saying there product is "silent" this one says "very quiet"... please keep me/us updated on this purchase.
 
True... with all canisters basically saying there product is "silent" this one says "very quiet"... please keep me/us updated on this purchase.
Click to expand...

Will do my friend.
 
I got 2 SunSun filters and love them the one bigger has uv and 4 frays of filter pads and the other is all bio balls
Click to expand...

WAIT, were you the one that put poly fil brand foam into a sunsun? If it is you, is it safe?

what kind("flavor") is it?
 

Random Great Topic!

Snail Jello (Snello) Recipes
Snail Jello

Today's Deals


Amazon Daily Aquatic Deals

Amazon Aquatic Coupons


Advertisement



Advertisement








Advertisement




Fish Lore's aquarium fish forum - aquarium hobbyists helping hobbyists since 2005!

Fish Lore is an amazon affiliate and some pages may contain links to aquarium related products on amazon: Affiliate Disclosure

Aquarium forum statistics

Threads
427,379
Messages
4,714,395
Members
127,550
Back
Top Bottom