-
-
Sagi replied to the thread Filter disperses the co2 output entirely, is it good?.Update I have the answer, I believe The hard white Teflon gasket will go into the w21-8 female nut of the adapter ONLY if there wasn't...
-
-
Sagi replied to the thread Filter disperses the co2 output entirely, is it good?.I have stated it's an internal filter + powerhead connected through a long tubing from substrate level into a two rows spray bar just...
-
Sagi replied to the thread Filter disperses the co2 output entirely, is it good?.Well, now that I finished with that CO2 stabilization (I was running diy for 2-3 years, so this is a huge thing), I would like to...
-
Sagi reacted to Dechi's post in the thread Filter disperses the co2 output entirely, is it good? with
Like.
That’s unfortunate. I also had some mishaps when I fiddled with my regulator so I sure will try to avoid it as much as possible from... -
Sagi replied to the thread Filter disperses the co2 output entirely, is it good?.Well, for anyone who interested just an update, that fixed the leak on the cylinder side, and no pressure dropping anymore, staying...
-
Sagi replied to the thread Filter disperses the co2 output entirely, is it good?.Well, system wasn't connected properly so initially the adapter wasn't tight strong enough to the regulator, only by hand, so I used a...
-
-
Sagi reacted to Mudminnow's post in the thread Filter disperses the co2 output entirely, is it good? with Like.
Despite the perfectly undisturbed CO2 columns you see, I think blowing the CO2 around the tank does a better job at raising the CO2...
-
I know the answer is "Yes, this is excellent. Having your filter fully disperse the CO2 output is exactly what you want in a planted...
-
Sagi replied to the thread Pogostemon Issue.Week aqua 50w mounted 17 above the water surface Just recently reduced its intensity from 80 to 70%, so it obviously a too intense light...
-
-
I'm no expert but I fought the same thing with stem plants in my new tank, so here's what I learned while digging into it. Stems bending...
-
Some of my stem plants have bent like that when the lighting was extra strong. I've played around with this a bit out of curiosity. When...
-
Hi, why the pogostemon stellatus bending and leaning like that
-
-
Sagi replied to the thread Lighting problem.Actually, I think it grew strictly upright when this light was set to 40% Additionally, this could be an uneven currents issue
-
-
Sagi replied to the thread Lighting problem.Hi, why the pogostemon stellatus bending like that, light too strong? I had this plant growing in the same tank with same lights in...
-
-
We always apply a single number for the pH in a tank, but in reality, pH varies very locally, also in nano tanks, and plants actively...
-
Sagi replied to the thread Suggestions for this tank.So you suggest that "At a very high pH, non-EDDHA iron chelates (like Fe-EDTA or Fe-DTPA) lose their stability, causing the iron to...
-
csm+b - yes, a common mix EDDHA .... 0.1 ppm target ....common number, but I find iron overestimated; chemically it is a bit of a...
-
Sagi replied to the thread Suggestions for this tank.Hi, tell me, I came to the understanding that the commercial iron fertilizer I use is practically useless with the pH which I haven't...
-
-
Sagi replied to the thread Suggestions for this tank.Well, not that many sell the tenso cocktail, mostly in western Europe where their website not even support English, having to translate...
-
-
-
Loading…
-
Loading…
