-Harlequin-rasbora water flow

Shrek

New Member
Member
Messages
11
Running a 40 gallon breeder tank with a fluvsl207 and a tidal55 job and a maxi jet 600. Not sure if the water movement is too much for #Harlequins-rasboras e with the maxi jet pump
 

Advertisement
My shoal of 15 in a 33g long get a gentle flow at one end and a calmer zone at the other. They go back and forth seeming to enjoy both. I would aim for a gentle flow and not too turbulence with perhaps a quiet spot available to them.
 

Advertisement
I'm not sure what kind of flow you have with your equipment Shrek, but I agree with bgarthe. I've found my harlequins seem to like gentle flow the best.
 
Going by rated numbers, the 207 is about 200 gph, the Tidal 55 about 250 and a Maxi-Jet 600 about 160. That's over 600 gph on a 40, roughly 15x turnover before the canister media slows it down. Without the Maxi-Jet it's closer to 11x, which harlequins handle fine. I'd pull the powerhead first and see if they start using the whole tank.
 
I keep mine in a high flow environment and they do fine. They seem to like to hang out in the flow, even though they can go places where the flow is lower.
 

Random Great Topic!

Advertisement



Advertisement








Advertisement




Back
Top Bottom