Visio 26-gallon Tank And Stand

My tank was slightly off level, too. I drained almost all the water out, then inserted small carpet squares (that match my carpet) underneath the low side, which was the front. Definitely did not want the 600+ lb set up leaning forward at all. The stand is also bracketed to the wall. Wooden wedges would work, too, and can be snapped off to be made virtually invisible

Could you recommend which legs to shim?

 

You are going to want to shI'm the legs on the side where the water is lower...and you might want a level to make sure everything is good.

 

You are going to want to shI'm the legs on the side where the water is lower...and you might want a level to make sure everything is good.

Alright, so shI'm both left-most legs then?

Could you please describe how I use the wooden shims, as I am not sure how much water I should have in my tank and how the shims will be placed under the legs when I have carpet...

 

You are going to want to shI'm the legs on the side where the water is lower...and you might want a level to make sure everything is good.

Exactly

 

I'll reply on your other thread