Fluval C4 Impeller Noise

mytmouse
  • #1
HI everyone,

So I recently bought a 28 gallon setup that came with a Fluval C4. I didn't put the filter on at first because I had a AC30 that came from my 10 gallon and it was already seeded. Well, I wanted to start running the C4 so I can use the AC30 at some point back on the 10 gallon for my next setup. I haven't decided what I'll do with it just yet, but I want the option.

My problem is I got the C4 all cleaned up, I also pulled the impeller out and cleaned the motor housing. Nothing too extravagant, I just wiped the impeller off and flushed the motor housing with a little water. I hook it up tonight and that thing is ROARING! I mean it is LOUD! The filter is functioning fine, it has good water flow and everything. It's just loud as all get out! Have any of you had experiences with this? I read after Googling some people used vaseline or silicone lubricant on the impeller shaft. But I didn't know if that would be a good idea.

Thanks!
 

Advertisement
Suzanne2
  • #2
Hi, if it's a used filter the impeller or the shaft may have unevenly worn down from sand or gravel getting into it.
This video I saw on YouTube is good for showing what I mean, it's a diferent brand but probably similar in design .
 

Advertisement
mytmouse
  • Thread Starter
  • #3
Oooh thanks Suzanne! Let me go check mine out right now! After watching this video, I'm trying to think if I even saw a shaft in the motor at all! Maybe I just wasn't paying attention.
 
mytmouse
  • Thread Starter
  • #4
Suzanne2 I owe you a beer! Of course there was a shaft in the motor... lol. But I saw what the issue was after I yanked it out. When I was putting the motor back on I think I misthreaded it and it allowed the impeller to actually hit against the housing. I did a couple quick dry runs and I saw the error of my ways. She's purring like a kitten now! Thank you so much!!
 
Suzanne2
  • #5
Awe
Suzanne2 I owe you a beer! Of course there was a shaft in the motor... lol. But I saw what the issue was after I yanked it out. When I was putting the motor back on I think I misthreaded it and it allowed the impeller to actually hit against the housing. I did a couple quick dry runs and I saw the error of my ways. She's purring like a kitten now! Thank you so much!!
Awesome! Glad it worked! I know I hate that rattling impeller noise whenever it happens, it could drive you crazy
 

Similar Aquarium Threads

  • Locked
Replies
11
Views
4K
Kain
Replies
7
Views
321
Cherryshrimp420
Replies
6
Views
430
BradleyH2O
Replies
6
Views
958
Puck44
Replies
8
Views
2K
rmurray
Advertisement






Advertisement



Top Bottom