| The suction tube that goes down into the tank has a series of thin rectangular holes in it all the way around the tube....the guppy or endler fry are so small that they can be sucked into the holes if they just go by one of them...so I took quilt batting that you buy to make quilts and cut some of it into small rectangles ...folded it over and sewed across the bottom and up the folded side ...turn it right side out....to make a "Bootie" to fit over the end of the tube. You need to use only enough thickness to keep the bootie stable ....then just slip the bootie up over the end and above the joining and fasten with a common rubber band.....babies cannot slip through and the dirt from the tank can....keep a watch on the bootie and when it looks dirty, just take it out and wash it out or make a new one and put it on the end.....you can make several up at a time to keep some ready on hand....very cheap way to not lose any babies.....good luck! |